Rockville 2-Person Podcast Podcasting Recording Kit Mics+Boom Stands+Headphones

$979.91 $261.80 Save 73% Sold out
Shipping calculated at checkout.
Product Description
How to Setup Your Podcast:

Package Includes:
  • (1) Rockville RockMix 2 Channel Mic/Instrument Pro Recording Mixer+USB Interface/EQ
  • (2) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  • (2) Rockville RDMS70 Desktop Mic Stand with Boom+Steel Round Base+Adjustable Height
  • (2) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
  • (1) Rockville RC135TRS 3.5mm Male to Dual 1/4" TRS Female Headphone Splitter Cable

Video of RockMix 2:
How to Set Up Your Rockmix 2:

 

What's in the Box:
  • Mixer with USB recording interface
  • USB cable
  • USB power adapter
  • 4 Non-slip rubber pads
  • Owner manual and warranty card
Recommended Applications:
  • Two Person Live Stream/recording (Zoom, podcast, etc)
  • One instrument and one singer who wants to record or live stream or perform live
Features of RockMix 2:
  • Rockville RockMix 2 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface
  • Switchable +48v Phantom Power on both channels for use with condenser microphones
  • Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks
  • Channel 1 is a microphone channel
  • Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
  • Independent Level Controls for Main and Headphone/Monitor Outputs
  • Integrated Plug-and-Play USB Audio Interface for Mac & PC
  • USB Interface will send the master output in stereo to your DAW so you can record and/or stream your mix
  • Operates on USB BUS Power or 5V DC External Power Supply (Included)
  • Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
  • Super mini 2-channel mixing console designed for home studio recordings or live broadcast streaming
  • RCA (L&R) outputs allow you to send the master output to an amplifier, powered speakers, recording device, etc
  • 3.5mm headphone output
  • Additional 3.5mm mic input allow you to connect an additional microphone in addition to the 2 main channels
  • Each channel has a 2-band EQ to customize the sound
  • Each channel has pan and level controls
  • USB playbck switch assigns the signal to the MAIN MIX or MONITOR
  • Monitor/headphone level control knob
  • Main mix level control knob
  • No external drivers are needed for mac or PC
Specifications:
  • Sensitivity/impedance:
  • CH1 & CH2 XLR: 2mV/1.8k ohm(gain max)
  • CH1 Jack: 10mV/ 12k ohm(line)
  • CH2 Jack: 30mV/ 20k ohm(line), 30mV/240k ohm(guitar)
  • Output Level: 5.8V max(main, monitor)
  • Frequency Range: 20-22000Hz
  • THD: <= 0.05%
  • S/N Ratio: 80dB

    Equalizer:

  • Bass Range: ±15dB/80Hz
  • High Range: ±15dB/12kHz
  • Headphone: Impedance: >=16 ohm
  • USB Interface: USB1.1 compatible, 16-bit delta-sigma, 44.1kHz sampling rates, 48kHz max.
  • Phantom Power: +48V
  • Power Supply: USB 5V 500mA Via USB Port of Computer; Via USB Power Adaptor; Via power bank
  • Operating System: Windows 2000, XP or higher; Mac OS 9.0.4 or higher, 10.X or higher
  • Item Dimensions (inches): 3.9” x 5.3” x 1.65”
  • Item Weight: 0.95lb

 


How to Setup a Rockville Condenser Microphone with Your Computer:

Video of RCM03:


Unboxing Video of RCM03:




The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.

The aluminum construction makes the RCM03 tough enough for Live sound applications as well!

Multiple connection options!

This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.


What's Included:
  • RCM03 Condenser Microphone (made of aluminum!)
  • 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
  • 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  • Metal shock mount
  • Metal Anti-wind foam cap
  • Owners Manual
  • Warranty card

Features:

  • Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
  • Aluminum high quality construction
  • Polar Pattern: Internally Polarized Condenser Cardioid Design
  • Large diaphragm for smooth, natural sound and low noise
  • Power Requirements: 48V DC Phantom Power
  • Uni-directional
  • Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  • Output impedance: 200O±30%(at 1kHz)
  • Standard operating voltage: 3V
  • Operating voltage range: 1.5V-10V
  • Current consumption: less than 500uA
  • Voltage deduction characteristic: within 3dB at 2V
  • S/N ratio: More than 24dB
  • Frequency Response: 30Hz - 20 KHz
  • Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  • Load impedance: Greater or = to 1000 Ohms
  • Equivalent Noise level: Less than 18dB A (IEC581-5)
  • Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
  • Electrical current: Greater than 4.8Ma
  • Microphone body net weight:320 Grams (0.7 Pounds)
  • Microphone Max.diameter 44mm (1.73” inches)
  • Microphone Length 217mm (8.54” inches)
  • Microphone material: steel grille + Alluminum (handheld part)
  • PCB Layout: Surface mount

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

How to Set Up Your RDMS70:


Video of RDMS70:

Features:
  • Rockville RDMS70 Desktop Mic Stand with Boom and Steel Round Base and Adjustable Height
  • Heavy-duty weighted steel round base
  • Adjustable Height
  • Boom arm for precise positioning
  • Rubber pad for extreme stability prevents sliding
  • Low profile design
  • Scratch-resistant powder coated finish

Specifications:

  • Boom length: 13.8" (40cm)
  • Height adjustment: 10.63" to 15.75" (27cm – 40cm)
  • Base Diameter: 6.3" (16cm)
  • Thread Size: 3/8"
  • Weight: 4.85 lbs (2.2 kgs)


 

Features of RC135TRS:

  • Rockville RC135TRS 3.5mm Male to Dual 1/4" TRS Female Headphone Splitter Cable
  • 100% Copper Conductors for Enhanced Signal Clarity
  • 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
  • Gauge: 26 AWG
  • Color: Black
  • Length: 1 Ft.

Includes:

  • PRO-M50 headphones
  • Detachable cable
  • Soft suede and leather ear cushions (interchangeable)
  • Leather hard travel protective case
  • Gold plated ¼" adapter

All About Your PRO-M50:


Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

  • Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
  • Professional High-Definition Studio Headphones
  • 40mm Neodymium drivers
  • Ergonomically designed swivel ear cups
  • Supreme sound isolation
  • Accurate sound reproduction
  • Minimal bleed
  • Sturdy and durable steel headband and arms
  • Soft leather headband cover
  • Interchangeable leather and soft suede ear cups covers included
  • Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
  • Gold plated 3.5mm connector
  • Gold plated ¼" adapter
  • Hard leather carrying case
  • Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

  • Style: Closed-Back
  • Design: Circumaural
  • Transducer Type: Dynamic
  • Driver: 40MM
  • Sensitivity: 97±3dB
  • Impedance: 32ohm
  • Frequency Response:10Hz - 25KHz
  • Max. Power: 600MW
  • Rating Power: 260MW
  • Net Weight: 290g (with cable)

Shipping & Returns

Row content