Rockville W12K6D4 V2 12" 2400w Subwoofer+Vented Sub Box+Mono Amplifier+Amp Kit

$693.93 $294.85 Save 58%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Rockville 12" Car Audio Subwoofer
  • (1) Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp
  • (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
  • (1) Rockville Single 12” 1.22 cu.ft. 3/4" MDF Vented Subwoofer Enclosure Box
  • 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
  • 12 Feet of 14 AWG Blue Speaker Wire
  • 2 Spade Terminals

Video of W12K6D4 V2:


Features:

  • Rockville W12K6D4 V2 K6 Series 12" Dual 4-Ohm Car Subwoofer
  • Peak Power Handling: 2400 Watts
  • Program Power Handling: 1200 Watts
  • CEA Rated RMS Power Handling: 600 Watts
  • 2.5" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
  • The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
  • Double Stacked 100 Oz High Quality Magnet
  • Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
  • Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  • Red Stitching Cone Reinforcement Ensures Long Life
  • Polypropylene (PP) Dustcap
  • Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
  • Impedance: Dual 4-Ohm Voice Coils
  • Vented Hole on T-yoke Enhances Heat Dissipation
  • Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
  • Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
  • High BL Magnetic Motor Gap
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
  • Cutout Diameter: 11.125” inches
  • Mounting Depth: 5.75” inches
  • Frequency Response: 27 Hz - 1.5K kHz
  • 8mm T-Yoke + 8mm Washer
  • Sensitivity: 85dB
  • Sealed Enclosure Volume: 1.0 - 1.5 Cubic Feet
  • Vented/Ported Enclosure Volume: 1.65 - 2.5 Cubic Feet
  • Weight: 17.64 Lbs.
  • Shipping Weight: 22.05 Lbs.
  • Shipping Box Dimensions: 15.75" x 15.75" x 13.6" Inches
  • XMAX:22 MM (One way)

Detailed Info:

  • Body: Non-Pressed Paper
  • Gap Plate Inside Diameter: 80mm (3.14 inches)
  • Gap Plate Outside Diameter: 156mm (6.14 inches)
  • Gap Plate Thickness: 20mm (0.8 inches)
  • Yoke Outside Diameter: 145mm (5.71 inches)
  • Yoke Thickness: 8mm (0.31 inches)
  • Yoke Pole Diameter: 60mm (2.4 inches)

TS Parameters:

TS Parameter Wired in Series Wired in Parallel Description of Measurement

Electrical Parameters

Re

8.58 Ohm

2.14 Ohm

Electrical voice coil resistance at DC

Le

6.549 mH

1.646 mH

Frequency independent part of voice coil inductance

L2

9.015 mH

2.289 mH

Para-inductance of voice coil

R2

14.79 Ohm

3.72 Ohm

Electrical resistance due to eddy current losses

Cmes

451.49 µF

1832.58 µF

Electrical capacitance representing moving mass

Lces

35.18 mH

8.68 mH

Electrical inductance representing drive compliance

Res

56.58 Ohm

14.09 Ohm

Resistance due to mechanical losses

fs

39.9 Hz

39.9 Hz

Drive resonance frequency

Mechanical Parameters (Using Laser)

Mms

219.823  g

219.582 g

Mechanical mass of drive diaphragm assembly including air load and voice coil

Mmd (Sd)

206.885 g

206.644 g

Mechanical mass of voice coil and diaphragm without air load

Rms

8.605 kg/s

8.505 kg/s

Mechanical resistance of total-drive losses

Cms

0.072 mm/N

0.072 mm/N

Mechanical compliance of drive suspension

Kms

13.84 N/mm

13.81 N/mm

Mechanical stiffness of driver suspension

Bl

22.065 N/A

10.946 N/A

Force factor (Bl product)

Lambda s

-0.013

0

Suspension creep factor

Loss Factors

Qtp

0.873

0.885

Total Q-factor consider all losses

Qms

6.41

6.475

Mechanical Q-factor of of drive in free air considering Rms only

Qes

0.972

0.985

Electrical Q-factor of drive in free air considering Re only

Qts

0.844

0.855

Total Q-factor considering Re and Rms only

Other Parameters

Vas

26.3903 l

26.4413 l

Equivalent air volume of suspension

n0

0.166%

0.164%

Reference efficiency (2 pi-radiation using Re)

Lm

84.4 dB

84.35 dB

Characteristic sound pressure level (SPL at 1m for 1W @ Re)

Lnom

84.1 dB

84.05 dB

Nominal sensitivity (SPL at 1m for 1W @ Zn)

Sd

508 cm²

508 cm²

Diaphragm area

EBP

41.0

40.5

Efficiency bandwidth product


Video of RWK41:


Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

  • 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  • 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
  • 17’ – 18 Gauge Blue Remote Cable
  • 17’ – 16 Gauge Clear Speaker Wire
  • 3’ – 4 Gauge Clear SuperFlex Ground Wire
  • Gold Plated AGU Heat Resistant Fuse Holder
  • 60 Amp AGU Gold Plated Fuse
  • 7’ Split Tube Loom
  • Accessories Inclu
Shipping & Returns

Row content