Package Includes:
- (1) New Kicker 10CVT102 10" Car Subwoofer
- (1) Brand new Kicker 10ZX300.1 900 watt mono car amplifier
This is a factory matched system that was created by our audio technicians. This is the perfect matched system, cause the sub is 400 watts RMS and the amp is 300 watts RMS. This gives you the perfect amount of power to maximize the sub, but not enough power to break them or blow them. This package is highly recommended by Kicker technicians as well as Audiosavings technicians.
Wiring Info:
The sub is 2 ohms (Single Voice Coil). This amp is a 2 ohm stable mono amp. This is what makes this set-up perfect! See below diagram on how to wire this together properly.
Description for CVT10-2:
The Kicker CVT series is known to be one of the best sounding subwoofers with a very slim mounting depth. These subs can be mounted easily in virtually any vehicle because of its' slim design.
Kicker engineers worked for the past 3 years to improve and perfect the CVT series subwoofers.The engineers added a newly designed basket and a built in plate adapter which allows for even shallower installations on these new 10CVT models.
Another major advantage of these is that they have a high sensitivity rating, and they do not require a huge amp to push them to perform at high volume levels.
The real amazing thing about these subs are that they have the same amount of power as the famous CVR series. This subwoofer has 800 watts peak output and 400 watts RMS.
Features:
- Kicker Comp VT 10CVT10 10" shallow mount subwoofer
- Peak Power: 800 watts
- RMS Continuous Power: 400 watts
- Shallow-mount subwoofer with true high-performance
- New model with new and improved basket structure
- New model includes a built-in steel plate adapter which allows shallower installations
- This sub is slim enough to be mounted in virtually any vehicle
- Delivers extreme bass with minimum depth
- Four-layer voice coil for max power handling
- Dark gray modified-spoke cone with bracing for clear bass response
- Ventless solid-pole design for direct mount to enclosure rear wall
- Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth
- Injection molded SoloKon cone
- Ribbed Santoprene surround
- High-temp coil wire
- Slender, strong steel basket with coil-cooling perimeter venting
- Durable Spiralead tinsel leads
- Stitched surround for enhanced cone-to-surround strength
- Tough double-stitched surround
- Special spring-loaded binding posts for minimizing depth
- Impedance: Single 2 Ohm
- Frequency Response (Hz) 25-350
- Mounting Depth (IN.,CM) 4-1/4, 10.8
- Mounting Cutout (IN.,CM) 9-3/16, 23.3
- Recommended Sealed Box Volume: 0.8 - 3.0 cubic feet
- Recommended Vented Box Volume: 1.25 - 1.75 cubic feet
Description of 10ZX300.1 Amplifier:
Features:
- Kicker 10ZX3001 Mono Car Amplifier with 300w RMS
- KICKER Amp’s actual power always exceeds its rated power, documented inside each carton
- Birth sheet with actual tested power included with each amp in the box
- RMS Power at 2 ohms: 300 watts x 1
- RMS Power at 4 ohms: 150 watts x 1
- 2 Ohm stable
- Class A/B
- Balanced differential inputs for noise elimination and factory-radio compatibility
- 3 automatic turn-on modes
- +12dB of boost centered at 40 hertz
- Optional vinyl skins for personalizing heat sinks available
- Thermal, voltage, and short circuit protection circuitry
- Low-pass crossover filter (80 Hz, 24 dB/octave)
- MOSFET power supply
- LED power and protection indicators
- Special technology to eliminate unwanted noise
- RCA Speaker-level inputs
- Automatic turn on modes: remote, DC offset, or signal sense
- Frequency response: 25-20000 Hz
- Preamp RCA outputs
- CEA-2006 compliant amplifier
- Subsonic Filter (24 dB at 25 Hz)
- Fuse Rating: 40A (2x20A FUSES)
- Dimensions: 13-1/2"L x 9-5/8"W x 2-1/8"H
- 8-gauge power and ground leads recommended
Kicker ZX series amps have been around for years. They are, and have always been one of the best series of amps. Every few years Kicker makes some upgrades to make them even better. This year Kicker added the ability to customize your amplifier. You can purchase optional vinyl skins to put on top of your amplifier which will customize the look of your amp. You can purchase the skins from Kicker.com.
The 10ZX3001 is a mono amplifier with 300 watts RMS. This amp has great controls including a bass Equalizer, 24 dB per octave fixed low pass crossover filter, and special technology to eliminate unwanted sounds and distortion frequencies.
If you want the best and most reliable amplifiers on the market then the Kicker ZX series are the best choice.
