DB DRIVE PD2000.1
The PD2000.1 is a 2000 watts platinum Series class D monoblock amplifier with built-in variable crossovers. The crossovers feature a variable frequency selection (50 Hz-250 Hz) for precise low-pass filtering. For added low frequency performance the amplifier is equipped with a variable 0-12db bass boost at 45Hz.

With thermal protection the amplifier is protected against the damage caused by the prolonged exposure to high temperatures. Once the thermal circuit is activated the amplifier will shut down to cool off. The power fusing protects the amplifier against short circuits and excessive current.

This monoblock amplifier makes use of heavy gauge bare wire distribution blocks, which allows maximum power and signal transfer with minimal resistance. It is a mono amplifier, however you can connect multiple subwoofers to it. The PD2000.1 class D amplifier produces plenty of raw energy to drive your subs, delivering a tight, satisfying sound output.

Features:

• DC Offset Protection:
  This circuit protects the output of the amplifier against DC voltage. If for some reason DC voltage is detected at the output stage, the amplifier will shut down protecting the speakers from direct current.
• Short Circuit Protection:
  The circuit protects the amplifier from damage due to a short found in the speakers or wiring. If one of the speakers or its wiring comes in contact with ground, the amplifier will shut down. To resume normal operation, correct the problem and turn the head unit off, then back on. The amplifier will reset and play again.
• Thermal Protection:
  To protect the amplifier circuitry against damage caused by prolonged exposure to high temperatures, a thermal protection circuit is activated if the amplifier reaches excessively high operating temperature. Once the thermal circuit is activated, the amplifier will shut down to cool off. The amplifier will automatically turn back on once it cools down to a safe operating temperature.
• Power Indicator:
  The diagnostic L.E.D. Illuminates when the amplifier is on and receiving power.
• Multi-Link Amplifier Technology:
  If so desired, PD2000.1 can be linked with another PD2000.1 to double the output to your speakers.
• Built-in Crossover:
  The "Platinum Series" amplifiers include a built-in variable crossovers. The crossover features a variable frequency selection (50Hz - 250Hz) for precise low pass filtering for the PD2000.1.
• Power and Speaker Distribution Blocks:
  Heavy gauge bare wire distribution blocks are provided for maximum power and signal transfer with minimal resistance.
• Bass Boost:
  For added low frequency performance the amplifiers are equipped with a variable 0~12 dB bass boost @ 45Hz.
• Line Out:
  Full range line outputs have been provided for convenient connection to additional amplifiers in the system. The outputs are buffered to reduce signal loss. Please note that the amplifier's input level adjusts these level outputs.
• Power Fusing:
  This protects the amplifier against short circuits and excessive current.
• Remote Turn-on:
  Automatically turns amplifier on when connected to the head unit's remote output. The amplifier will turn on and off with the head unit to save current consumption. This control also operates the reset circuit for the amplifier's protection. It must be connected with the head unit in order to reset protection circuits.
• Adjustable Input Sensitivity:
  Allows you to fine-tune the level matching between your source and the power amplifier.
• Low Impedance Stability:
  PD2000.1 -*1 Ohm Mono
  *When PD2000.1 are in the multilink configuration the lowest impedance capability is 2 Ohm

Specifications:

• RMS Power Handling: 500 watts x 1 chan. @ 4 ohms
• RMS Power Handling: 1000 watts x 1 chan. @ 2 ohms
• RMS Power Handling: 2000 watts x 1 chan. @ 1 ohms
• Input sensitivity: 250mV-6V (Low level)
• Variable high-pass filter (10-50 Hz, 24 dB/octave)
• Variable low-pass filter (50-250 Hz, 18 dB/octave)
• Subsonic filter (20-50 Hz @ 24 dB)
• Phase Shift: 0-180°
• Signal-to-Noise Ratio: >90 dB
• THD (Total Harmonic Distortion): <.5%
• Input Voltage: 10V-16V
• Jack for Remote Control: Yes
• Remote Control Included: Yes
• Power Fuse: 2 x 80A
• Bass Eq: 0-12dB @ 45Hz
• Jack for Remote Control: Yes
• Remote Control Included: Yes
• Frequency response: 10-250 Hz
• Dimensions: 10-1/4"L x 23"W x 2-1/4"H
• Weight: 25 lbs