Pair Autotek ATS693 6x9" 800 Watt 3-Way Car Audio ATS Series Coaxial Speakers

$59.95 $29.95 Save 50%
Shipping calculated at checkout.
Product Description

 Authorized Auto Tek Dealer!

Features:

  • Pair Autotek ATS693 6x9" 800 Watt 3-Way Car Coaxial Speakers
  • RMS Power Handling: 200 Watts
  • Peak Power Handling: 400 Watts
  • Speaker Impedance: 4 Ohms
  • Speaker Type: Full-Range Speaker
  • Frequency Response: +/- 3db: 46hz-20khz
  • Sensitivity (1 Watt/1 Meter): 88db
  • Crossover Point: 1k Hz + 3k
  • Crossover Slope: 12db
  • Mounting Diameter/Cut Out: 8.64 X 5.98
  • Outside Diameter: 10.35 X 7.20
  • Mounting Depth/Chassis Depth: 3.35
  • Product Dimensions: 14.25 X 11.75 X 5.5 In
  • Product Weight 6.15 Lbs
  • Tweeter Dome Material: Neo-Mylar Soft Dome Tweeter, Impact Resistant Tweeter Elements
  • Surround: UV Resistant Rubber Surround Moisture Resistant Rubber Surround With High Mid-Bass Impact
  • Cone: Silver Alpha-Cellulose Polypropylene Cones - Treated Pressed Paper Cone. Produces Musical Midrange And Bass Tones While Remaining Light Weight
  • Surround / Cone Coupling: High Temperature Adhesive. The Cone/Surround Connection Utilizes A High Temp Adhesive Which Assure The Cone And Surround Do Not Separate In High Power Uses Or Extremes Of Weather
  • Gasket: Textured Abs Assures A Ridged Linear Seal To The Mounting Surface
  • Tinsel Leads: Braided Highly Conductive While Remain Flexible During High Power Applications
  • Voice Coil: Pure Copper Creates Strong Magnetic Field With A Very Thin Extrusion
  • Voice Coil Former: Kapton, Lightweight And Efficiently Dissipates Heat
  • Spider: Epoxy Infused Natural Fiber Allows Flexibility While The Epoxy Which Gives Strength During The Manufacturing Process
  • Cooling System: Over-Coil, Air Is Exchanged Over The Voice Coil Through The Spider
  • Crossover Type: Passive Butterworth, Smooth Transition Of Frequencies From Midrange/Midbass To The Tweeter Element
  • Crossover Special: 6db Internal Integrated Into The Design To Assure Smooth Midrange To Tweeter Frequency Transitions
  • Frame: Anti-Resonant Stamped Steel Frame. Very Strong With Minimal Harmonics Or Distortions From Flex Or Ringing
  • Motor: Ferrite Magnet Creates A Strong Magnetic Field While Remaining Small Enough To Fit Nearly Every Application
  • Connectors: Use Spade Connectors Or Solder Direct For The Best Connection
  • Grills: Protects The Speaker From Accidental Damage. Not Used If Speaker Is Mounted Behind Vehicle Panel
  • Tweeter Material: Neo-Mylar Soft Dome Great Sound Quality And Increased Reliability
  • Tweeter Size: 1 Inch Clear Highs While Handling Plenty Of Power Without Sounding Harsh
  • Tweeter Surround Material: Kapton Lightweight And Efficiently Dissipates Heat
     
Shipping & Returns

Row content