MTX RZRPOD65 6.5" Polaris RZR 130w Dash Mount Roll Cage Speakers + 2-Channel Amp

$419.94 $269.85 Save 36%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) MTX RZRPOD65 6.5" 130w Dash Mount Roll Cage Roll Bar Speakers 4 Polaris RZR/UTV
  • (1) Hifonics TPS-A500.2 500w 2-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart

Authorized MTX Dealer!

Description of RZRPOD65:

Performance RZR Audio
The RZRPOD65 are the best solution for adding speakers to your Polaris RZR. These all weather custom fit speaker pods mount to the vehicle's roll cage and are contoured to fit perfectly in the OEM dash. No more mounting speakers on the outside of your cage where they can get damaged and no more having to settle for kick panel speakers since your feet have no ears anyway. The RZRPOD65 delivers high performance audio in a location where you can actually hear it.

OEM Finish
The MTX RZRPOD65 is a pair of speaker pods that are designed to mount directly to the dash/cage of specific Polaris RZR models. The pods are constructed using rotationally molded polypropylene which creates a finish that is weather resistant and durable. The pods mount in existing dash locations and do not require any cutting or drilling to install. Each pod includes a weather resistant 6.5" coaxial speaker featuring a polypropylene cone and clear Teteron tweeter that deliver exceptional full range clarity. The mounting location is ideal for sound staging as the speakers mount directly in front of the driver and passenger ensuring music can be heard clearly even at high speeds.


Features:

  • MTX RZRPOD65 6.5" 130w Dash Mount Roll Cage Roll Bar Speakers 4 Polaris RZR/UTV 
  • All-Weather Construction with UV Inhibitor
  • Custom Fit for RZR Dashboard
  • No Cutting or Drilling Required
  • Does Not Interfere with Aftermarket Cage
  • IP66 Rated
  • RMS Power (Watts): 65
  • Peak Power (Watts): 130
  • Sensitivity: 90.7dB (1W/1m)
  • Frequency Response: 85Hz - 22kHz
  • Impedance: 4Ω

Fit Guide:

MODEL                                2014    2015    2016    2017

RZR XP/XP4 1000                 Yes     Yes     Yes     Yes
RZR XP/XP4 TURBO                                   Yes     Yes
RZR 900/900S/1000S                        Yes     Yes     Yes
RZR 4 900 EPS                                  Yes     Yes     Yes


Description of TPS-A500.2:

Hifonics THOR compact Two Channel, 500 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors.

Features:

  • Hifonics TPS-A500.2 500w 2-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart 
  • Marine Grade Protection: YES - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  • Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage - Special preamplifier reduces incoming noise from source units dramatically improving sound quality
  • Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  • Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
  • Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifier develop a lot of power in a very small heatsink.
  • Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
  • Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  • Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  • Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
  • Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Marinized / Waterproof: YES - Water resistant for durability in any environment

Specifications:

  • Class: Full Range Class D
  • Variable Voltage: 0.2V~9V
  • Signal to Noise Ratio: >90dB
  • Frequency Response: 20Hz-20kHz
  • Crossover Type: Electronic 12dB Per Octave
  • Crossover Frequency Range CH1 & CH2: Switch Low Pass 300 Hz
  • Bass Boost: 0-12dB@45Hz
  • Subsonic Filter: 60Hz
  • Power @ 2-Ohms: 2 x 250W
  • Power @ 4-Ohms: 2 x 125W
  • Total Channels: 2
  • Audio Inputs: RCA
  • Power Terminal 12v/GND: Molex 10 ga
  • Speaker Terminal Wire Gauge: Molex Plug Connector
  • Fusing: 1 x 30 Amps
  • Certifications: Marine & Powersports
  • Dimensions: 3.70 X 5.51 X 1.77 inches (9.4 X 14.0 X 4.5 cm)
  • Weight: 2.12 lbs (0.96 kg)
Shipping & Returns

Row content