Peavey ALS 75.9 Mhz Assisted Listening System+4 Receivers+4 Additional Receivers

$629.95 $458.96 Save 27% Sold out
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Peavey ALS 75.9 Mhz Assisted Listening System With 4 Receivers/Ear Buds
  • (4) Peavey ALSR 75.9 Mhz Assisted Listening Receivers Body Pack

Authorized Peavey Internet Retailer!

Features of ALS 75.9:

  • Peavey ALS 75.9 Mhz Assisted Listening System Transmitter And Four Receivers With Ear Buds
  • Frequency Response 100Hz – 15 KHz, +/- 3dB 
  • Signal-to- Noise Ratio 60dB 
  • Total Harmonic Distortion <0.5% 
  • RF Carrier Frequency between 72-76 MHz 
  • Frequency Stability +/- 0.005% 
  • Modulation FM +/- 75KHz max 
  • Operating Range Up to 300 ft. line of sight

Transmitter

  • Mic Input – Connector: ¼” phone jack, Impedance: low impedance, unbalanced, with 9V DC at 1 mA for condenser mic.
  • Line Input – Connector: ¼” phone jack, Impedance: 100 K, unbalanced. 
  • Power Output – 80,000 uV @ 3 meters. 
  • Controls – Power ON/OFF, audio input gain adjust 
  • Indicators – Power ON LED, Audio Modulation LED 
  • Antenna – Permanently mounted telescoping whip 
  • Power Requirement – 9V DC, regulated @ 200 mA, AC/DC adapter provided 
  • Dimensions – 220 x 121 x 43mm 
  • Weight – 19.5 oz (600g)

Receiver

  • Controls – Combination VOLUME/ON-OFF wheel
  • Audio Output – 250 mW max into 16 ohms 
  • Connectors – 3.5mm mini jack for earphone output 
  • Earphones – Mini binaural ear buds 
  • Antenna – Integral with earphone cord 
  • Indicators – LED power on indicator 
  • Sensitivity – 2 uV for 12 dB Sinad with squelch defeated, Squelches at 10 uV for min. 50 dB S-N ratio 
  • Mute Threshold – 8-10 uV 
  • Power Requirement – (2) AA Batteries 
  • Battery Life – 17-20 hours with alkaline battery 
  • Dimensions – 110 x 60 x 20 mm 
  • Weight 2.75 oz without batteries (80g)

Peavey Assisted Listening Transmitter
The transmitter operates on the 72-76 MHz auditory assistance frequencies. Transmitted field strength shall not exceed 8000 uV/m at 30 meters. Maximum FM deviation should not exceed 75 KHz. Transmitter signal pre-emphasis is 75 uS. Frequency stability is controlled by a phase locked loop synthesizer with crystal reference and accurate within +/-.0005% over 0-50 degrees C. The transmitter provides a permanently mounted telescoping whip antenna. The FCC approved transmitter is powered by a UL and CSA listed AC wall transformer providing 9V DC input to the transmitter via a 3.5mm DC jack. The transmitter includes a ¼” line-in jack, mounted on the rear panel and ¼” electret condenser microphone jack with 9V DC power (at 1.0 mA), and mounted on the front panel. Also included, is an adjustable audio level control and a red LED “Power On” indicator.

Peavey Assisted Listening Receiver
The receiver operates on a single frequency in the 72-76 MHz auditory assistance band. Frequency stability is controlled by a phase locked loop synthesizer with crystal reference and accurate within +-.005% over 0-50 degrees C. The receiver de-emphasis is 75 uS. The receiver provides a 3.5 mm headphone output jack mounted on the top panel. The receiver is powered by (2) AA batteries. The receiver has an OFF/ON/VOLUME control mounted on the top panel, LED lamp to indicate battery strength, and an antenna shall be integral to the earphone/ear bud cord


Features of ALSR 75.9:
  • Peavey ALSR 75.9 Mhz Assisted Listening Receiver Body Pack for ALS 75.9 System
  • Frequency Response 100Hz – 15 KHz, +/- 3dB
  • Signal-to- Noise Ratio 60dB
  • Total Harmonic Distortion <0.5%
  • RF Carrier Frequency between 72-76 MHz
  • Frequency Stability +/- 0.005%
  • Modulation FM +/- 75KHz max
  • Operating Range Up to 300 ft. line of sight

PEAVEY Assisted Listening Receiver
The receiver operates on a single frequency in the 72-76 MHz auditory assistance band.  Frequency stability is controlled by a phase locked loop synthesizer with crystal reference and  accurate within +-.005% over 0-50 degrees C. The receiver de-emphasis is 75 uS. The receiver  provides a 3.5 mm headphone output jack mounted on the top panel.  The receiver is powered by (2) AA batteries. The receiver has an OFF/ON/VOLUME control  mounted on the top panel, LED lamp to indicate battery strength, and an antenna shall be integral to the earphone/ear bud cord

RECEIVER

  • Controls – Combination VOLUME/ON-OFF wheel
  • Audio Output – 250 mW max into 16 ohms
  • Connectors – 3.5mm mini jack for earphone output
  • Earphones – Mini binaural ear buds
  • Antenna – Integral with earphone cord
  • Indicators – LED power on indicator
  • Sensitivity – 2 uV for 12 dB Sinad with squelch defeated, Squelches at 10 uV for min. 50  dB S-N ratio
  • Mute Threshold – 8-10 uV
  • Power Requirement – (2) AA Batteries
  • Battery Life – 17-20 hours with alkaline battery
  • Dimensions – 110 x 60 x 20 mm
  • Weight 2.75 oz without batteries (80g)
Shipping & Returns

Row content