Rockville 10" K6 Subwoofer+KICKER KEY5001 500w Smart Mono Amplifier+Amp Kit

Package Includes:

• (1) Rockville W10K6D2 V2 10" 2000w Car Audio Subwoofer Dual 2-Ohm Sub CEA Compliant
• (1) Kicker KEY5001 500w Mono Amplifier w/Bass Revealer Processor Smart Amp 47KEY5001
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

---

Video of W10K6D2 V2:

Features:

• Rockville W10K6D2 V2 K6 Series 10" Dual 2-Ohm Car Subwoofer
• Peak Power Handling: 2000 Watts
• Program Power Handling: 1000 Watts
• CEA Rated RMS Power Handling: 500 Watts
• 2.5" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
• The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
• Double Stacked 100 Oz High Quality Magnet
• Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
• Red Stitching Cone Reinforcement Ensures Long Life
• Polypropylene (PP) Dustcap
• Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
• Impedance: Dual 2-Ohm Voice Coils
• Vented Hole on T-yoke Enhances Heat Dissipation
• Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
• Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
• High BL Magnetic Motor Gap
• We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
• Cutout Diameter: 9.41” inches
• Mounting Depth: 5.29” inches
• Frequency Response: 36.7 Hz - 1.5K kHz
• 8mm T-Yoke + 8mm Washer
• Sensitivity: 85dB
• Sealed Enclosure Volume: 0.6 – 1.1 Cubic Feet
• Vented/Ported Enclosure Volume: 1.1 – 1.6 Cubic Feet
• Weight: 16.53 Lbs.
• Shipping Weight: 19.84 Lbs.
• Shipping Box Dimensions: 13.58" x 13.58" x 12.6" Inches
• XMAX:20 MM (One way)

Detailed Info:

• Body: Non-Pressed Paper
• Gap Plate Inside Diameter: 80mm (3.14 inches)
• Gap Plate Outside Diameter: 156mm (6.14 inches)
• Gap Plate Thickness: 20mm (0.8 inches)
• Yoke Outside Diameter: 145mm (5.71 inches)
• Yoke Thickness: 8mm (0.31 inches)
• Yoke Pole Diameter: 60mm (2.4 inches)

TS Parameters:

TS Parameter	Wired in Series	Wired in Parallel	Description of Measurement
Electrical Parameters
Re	4.32 Ohm	1.09 Ohm	Electrical voice coil resistance at DC
Le	5.32 mH	1.047 mH	Frequency independent part of voice coil inductance
L2	6.32 mH	1.412 mH	Para-inductance of voice coil
R2	8.09 Ohm	2.04 Ohm	Electrical resistance due to eddy current losses
Cmes	641.37 µF	2573.92 µF	Electrical capacitance representing moving mass
Lces	25.48 mH	6.38 mH	Electrical inductance representing drive compliance
Res	45.72 Ohm	11.24 Ohm	Resistance due to mechanical losses
fs	39.4 Hz	39.3 Hz	Drive resonance frequency
Mechanical Parameters (Using Laser)
Mms	203.494  g	201.259 g	Mechanical mass of drive diaphragm assembly including air load and voice coil
Mmd (Sd)	196.785 g	194.549 g	Mechanical mass of voice coil and diaphragm without air load
Rms	6.939 kg/s	6.956 kg/s	Mechanical resistance of total-drive losses
Cms	0.08 mm/N	0.082 mm/N	Mechanical compliance of drive suspension
Kms	12.45 N/mm	12.25 N/mm	Mechanical stiffness of driver suspension
Bl	17.812 N/A	8.843 N/A	Force factor (Bl product)
Lambda s	-0.041	-0.043	Suspension creep factor
Loss Factors
Qtp	0.656	0.661	Total Q-factor consider all losses
Qms	7.254	7.139	Mechanical Q-factor of of drive in free air considering Rms only
Qes	0.685	0.692	Electrical Q-factor of drive in free air considering Re only
Qts	0.626	0.631	Total Q-factor considering Re and Rms only
Other Parameters
Vas	12.2205 l	12.4184 l	Equivalent air volume of suspension
n0	0.105%	0.104%	Reference efficiency (2 pi-radiation using Re)
Lm	82.4 dB	82.39 dB	Characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom	82.06 dB	88.03 dB	Nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd	327.9 cm²	327.9 cm²	Diaphragm area
EBP	57.5	56.8	Efficiency bandwidth product

---

Description of 47KEY5001:

The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing).

AUTO EQ

Using KICKER’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!

Start with these FREE TEST TONES for easy setup!

ALL THE CONTROL

Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.

HIDDEN TREASURE

Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.

START. DON’T STOP.

The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.

SUGGESTED ENCLOSURES

While we suggest this list for the ultimate bass experience, KEY500.1 will actually work with all KICKER subwoofers up to 12 inches; see your sales associate for the ideal subwoofer in your particular system, because every system is unique.

Specifications:

• Power (watts/ch), 1 Ohm mono: 500
• Power (watts/ch), 2 Ohm mono: 300
• Power (watts/ch), 4 Ohm mono: 150
• Standard dimensions in.(H x W x L): 1-11/16 x 4-1/8 x 8-1/8
• Metric dimensions cm(H x W x L): 4.3 x 9.2 x 20.7
• Frequency Response (Hz): 10-160
• Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

Row content