Kicker 44DL7S122 Dual 12" 3000w L7 Solo-Baric L7S Loaded Subwoofer Box+Amp+Wires

$1,609.93 $851.90 Save 47%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Kicker 44DL7S122 Dual 12" 3000w L7 Solo-Baric L7S Loaded Sub Enclosure
  • (1) Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp
  • (1) Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's

Authorized Kicker Dealer!

Description of 44DL7S122:

The Dual Solo-Baric L7S 12-Inch Subwoofer Enclosure is a ready-made bass machine with a legendary pedigree. The enclosure features the custom-designed vent/terminal cup with an extra thick front baffle and fortified back bracing for one of the sturdiest enclosures in the industry. Two Solo-Baric L7S 12-Inch Subwoofers pound out massive bass with a single 2O connection.

Features:

  • Kicker 44DL7S122 Dual 12" 3000w L7 Solo-Baric L7S Loaded Sub Enclosure 44L7S122 
  • Genuine Solo-Baric L7S Subwoofer Included
  • Custom Engineered Port Design
  • Heavy Internal Bracing
  • Single 2-Ohm Terminal
  • Easy To Install And Wire
  • Thick Black Carpeting
  • Rounded Corners
  • Embroidered KICKER Logo
  • Thick MDF Construction
  • The Dual Solo-Baric L7S 12-Inch Subwoofer Enclosure works best with 1500 watts of recommended power.

Specifications:

  • Type: Dual
  • Woofer: Solo-Baric L7 12"
  • Impedance: 2 Ohms
  • Power Watts: 3000 Peak / 1500 RMS
  • Frequency Response: 20-500 Hz
  • Sensitivity: 89.9 dB 1w/1m
  • Box Top Depth: 16-1/4" (41.3 cm)
  • Box Bottom Depth: 19-1/2" (19.4 cm)
  • Box Height: 16" (40.6 cm)
  • Box Width: 33-3/4" (85.7)
  • Includes one loaded enclosure with two 12-inch subwoofers; mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long); one owner's manual; two stickers

Video of dB15:

Description:

The dB15 is a mono amplifier with 6,000 watts peak output and 1500 watts Dyno-Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc. 

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB15 features a fuse with a rating of 150 Amps. Although we rate these conservatively at 1500 watts Dyno Certified @ 2 ohms, this amplifier puts out more power than this!

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB15 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise.

The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production, and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and inspect 20% of all the production items. We test the power, the controls, and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected we will send you a pre-paid shipping label and give you all of your money back. This means if for any reason you want to return the amplifier back for a full refund within 90 days, you can! (Amp must be complete along with the box).

Includes:

  • Amplifier
  • Bass Remote
  • Birth sheet with tested power
  • Owner’s manual
  • Mounting Screws
  • Warranty

Features:

  • Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
    - 2 Ohm: 1500 Watts x 1 Channel <1% THD+N
    - 4 Ohm: 900 Watts x 1 Channel <1% THD+N
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
    - 2 Ohm: 6000 Watts x 1 Channel
    - 4 Ohm: 3600 Watts x 1 Channel
  • High-Speed MOSFET Power Supply
  • Optical Coupler Class “D” Technology
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Low Pass Filter: 50Hz - 250Hz
  • Subsonic Filter: 15Hz - 55Hz
  • Phase Control Switch
  • Full IC-Controlled Protection Circuitry
  • Remote Dashboard Subwoofer Control
  • Fully Adjustable 12dB Bass Equalizer
  • Mute and Delay Soft Start System
  • RCA Preamp Line Output
  • 8 Volt Preamp Circuitry
  • Status Mode LED Indicator
  • Minimum THD at Rated Power: <0.1%
  • S / N Ratio: >90dB
  • Under Voltage Protection at 10V
  • Over Voltage Protection at 16V
  • Frequency Response: 15Hz - 250Hz
  • Damping Factor: >150 @ 100Hz
  • 150 Amp Fuse
  • Dimensions: (W x H x L)9" x 2.4" x 17.8"


About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. We aim to deliver products twice as good as our competitors at a fraction of the cost of famous brands. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All functions and components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to have engineers and technicians test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to the factory to quality control every product. After production is complete Rockville has the head of QC in our overseas office test a certain percentage of all products from the production line a second time to ensure that the quality meets our strict standards. All Rockville products are backed with a hassle free warranty.

Video of RWK01:

Description:

The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is lost per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires have a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

Features:

  • Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
  • 17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
  • 3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
  • Gold Plated ANL Heat Resistance Fuse Holder
  • 200 Amp ANL Gold Plated Fuse
  • 1 – 17’ High Grade Twisted Pair of RCA Interconnects
  • 25’ Translucent Blue Speaker Wire
  • 7’ Split Loom Tubing
  • 17’ Amplifier Remote Turn On Cable
  • Wire Ties and Ring Terminals, and all other accessories you need for a clean installation
  • Soft abrasion proof insulating jacket allows for 100% improved flexibility
  • PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

 

Shipping & Returns

Row content