Audio Technica AT2050 Studio Condenser Recording Microphone+Sound Isolation Box

Package Includes:

• (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
• (1) Rockville ISOBOX Recording Microphone Sound Isolation Box+Mic Stand+Pop Filter

Authorized Audio Technica Dealer!

Description of AT2050:

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
• Element: Externally-polarized (DC bias) condenser
• Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
• Frequency Response: 20 Hz - 20 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level:
  • 149 dB SPL, 1 kHz at 1% T.H.D.;
  • 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7 mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
• Switchable 80 Hz High-Pass Filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Includes: Shock Mount & Protective Pouch
• Product Weight: 0.91 Lbs.
• Product Dimensions: 6.69" inches Long, 2.05" inches Maximum Body Diameter

How To Set Up Your ISOBOX:

Setting Up A Dynamic or Condenser Microphone with Your ISOBOX:

How to set up ISOBOX to Mic stand:

Features:

• Rockville ISOBOX Recording Microphone Sound Isolation Box
  
• Includes an interior adjustable Mic Stand
  
• Includes built-in Pop Filter
  
• Includes travel bag with handle
  
• Fully enclosed to eliminate reverberation and reflections from your room
  
• Inside the box:  1.6'' inch thick high-density acoustic foam
  
• Removes echoes and reflections & reduces noise 
  
• Enhances sound clarity greatly and protects recordings from room coloration to produce dry sound
  
• A single layer pop filter is built in the front of the door to filter out harsh plosive sounds and unwanted bursts of air
  
• Great for vocal recording, podcasting, voice over work, instruments, percussion
  
• Perfect for home studios, recording studios, or recording outdoors
  
• Place the microphone inside the box with the door closed then you get a fully closed isolation box for your microphone
  
• Strong and stable box: The outer frame and grills are made of strong, lightweight aluminum
  
• Rubber feet 
  
• 5/8” mic thread + 3/8” adapter
  
• Can be mounted to a mic stand using the included accessories or used on a desktop
  
• Compatible with all the microphones, such as vocal microphone, condenser microphone, USB mics, cell phones
  
• Work with various mic stands such as tripod mic stands or even desktop mic stands
  
• The internal mic stand can be installed in 4 placements on sliding rails or it can be removed entirely
  
• 4 holes located on that bottom that allow 4 different entry points for XLR mic cables
  
• Removable door with tight latches for secure opening and closing
  
• USA and EU patent pending
  
• Box exterior dimensions: 13” x 13” x 16.93” Inches (330x330x430mm)
  
• Box interior dimensions: 9.84” x 9.84” x 14.17” Inches (250x250x360mm)
  
• Net weight: 6.6 lbs.

Row content