Crown CDI4300 CDI 4 x 300 Watt 70V Commercial Amplifier+DriveRack+Wall Control
Product Description
- (1) Crown CDI 4 x 300 Watt 70V Commercial/Restaurant Power Amplifier Amp CDI4300
- (1) DBX VENUE360 VENU 360 DriveRack 3x6 PA Speaker Sound Processor System+APP
- (1) DBX ZC1 Wall Mounted Programmable Zone Controller For DriveRack and ZonePro ZC 1
Description of CDI4300:
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more. Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tuning to help make installations quicker and easier.
Features:
- DriveCore Technology: Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
- Network Control and Monitoring: Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
- DSP: On-board Digital Signal Processor in each amplifier allows for custom configuration
- Input Router
- Input Delay: Up to 1000ms
- Input Parametric EQ: 8 band
- Crossover
- Output Parametric EQ: 8 band
- Output Delay: Up to 100ms
- LevelMAX™ Limiter
- Direct Drive 70/100Vrms Output: Each output channel is capable of provide either 70V or 100V for high impedance applications.
- Front-Panel Interface: Completely configure the amplifier using an intuitive front-panel interface.
- GPIO/AUX Port: Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Specifications:
- Channels: 4
- Sensitivity (for full rated power at 8 ohms): 0.7V RMS
- Rated Power Output (per channel @ 4 ohms): 300W
- Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms): > 104dB
- THD (full rated power, 20 Hz - 20 kHz): 0.0035
- Damping Factor (20 Hz to 100 Hz): > 1000
- Frequency Response (8O, 20 Hz - 20 kHz): +/-0.5dB
- Crosstalk (below rated power) 20 Hz to 1 kHz: > 80dB
- Input Impedance (nominally balanced, nominally unbalanced): 20 kO balanced, 10 kO unblanced
- Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion): 19 x 3.5 x 12.25
- Weight: 16.13 lbs (7.31 kg)
- Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240V~
Description of VENU360-V:
All the processing needed to supercharge your sound system. Now with complete control from your mobile device.
dbx took the dominant DriveRack® 260, improved its features, and added more. The
result?
The 3 input, 6 output DriveRack VENU360.
The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
AutoEQ™
New, improved AutoEQ algorithm ensures an extremely accurate, fast, and
non-intrusive automatic EQ experience.
With a RTA Mic “listening” to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.
The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delays!
Enhanced AFS™ Feedback Elimination
Enhanced AFS™ algorithm for faster, more precise feedback elimination, without
adversely affecting your system’s tone.
Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.
Updated Wizard Setup Functions
Updated Wizards make initial set up easy, while ensuring speaker tunings and
other settings are up-to-date.
Wizard functions in the DriveRack VENU360 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. The Wizards help you configure routing, level balancing, AutoEQ, Advanced Feedback Suppression, and provide access to updated speaker tunings – available for most major speaker brands. The addition of a Monitor Wizard makes it easy to configure and optimize stage monitors.
Mobile Control
Connect to the DriveRack VENU360 through your local network with your Android,
iOS, Mac, or Windows device to customize the sound of your loudspeaker system so
it sounds and performs optimally. The app lets you directly manipulate the
Compressor, Graphic EQ, Parametric EQ, Crossover settings, Speaker profiles, and
more with its attractive, easy-to-use graphical user interface.
Features:
Input Processing
Output Processing
Tested Wireless Routers:
Description of ZC1:
The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.
The ZC-1 provides programmable remote volume control for the DriveRack 220i, 260 and ZonePRO devices.
Specifications:
- Connectors: (2) RJ-45
- Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
- Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft.
- Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
- Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065
ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS:
The remote device shall provide computer programmable rotary potentiometer volume control for the dbx DriveRack 260, 220i and ZonePRO™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-1 remote controller.
Shipping & Returns
Row content
