Crown Pro XTI4002 XTI 4002 3200w DSP Amplifier+Audio Technica Headphones+Cables

• (1) Crown Pro XTI4002 XTI 4002 3200w Professional Power Amplifier Amp, Advanced DSP
• (1) Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones w/ 45mm Drivers
• (2) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
• (2) Rockvile RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable 100% Copper

Authorized Crown Audio Dealer!

Input EQ

6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters
Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ
8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Delay
For signal alignment of driver; 50 mS of total delay.

SubHarmonic Synth
Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

Peakx™ Plus Limiter
User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Presets
50 total presets, 49 of which are user-definable.

Features of XTI4002:

• XTI4002 2 Channe Power Amplifier
• RMS Power @ 2 Ohm: 1600 Watt x 2
• RMS Power @ 4 Ohm: 1200 Watt x 2
• RMS Power @ 8 Ohm: 650 Watt x 2
• Bridge RMS Power @ 8 Ohm: 2400 Watt x 1
• Bridge RMS Power @ 4 Ohm: 3200 Watt x 1
• Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable
• Performance
• Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
• Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB
• Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted)
• Total Harmonic Distortion (THD): < 0.5%
• Damping Factor 20 Hz to 1 kHz: > 500
• Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db
• Input Impedance (nominal)
• Balanced: 20k ohms
• Unbalanced: 10k ohms
• Maximum Input Signal: +22 dBu typical
• AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
• AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle
• Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
• Controls
• Level: Two front-panel rotary level controls, one for each channel
• Power Switch: On/Off switch applies AC power to the amplifier
• Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
• LCD Screen: Backlit liquid crystal display that shows preset and processing status
• Indicators
• Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs)
• –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip
• –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip
• Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio
• Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
• Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
• Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
• Input/Output
• Input Connectors: XLR, one per channel
• Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel
• Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors)
• HiQnet™ USB Connector: Type B, connects to HiQnet™ network
• Constructions
• Chassis: Steel
• Front Panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow
• Dimensions (WxHxD): 19" x 3.5" x 12.25"
• Net Weight: 18.5 lbs (8.4 kg)
• Shipping Weight: 21.5 lbs (9.8kg)

for the Owner's Manual

Authorized Audio Technica Dealer!

Description:

The ATH-PRO7X professional DJ headphones combine the comfort and low-profile style of an on-ear design with powerful 45mm drivers capable of handling 2,000 mW of input power. This combination gives DJs extremely accurate high-fidelity audio reproduction – even at loud volumes – from a pair of headphones that are easy to wear through even the longest gigs.

The ATH-PRO7X headphones come with two interchangeable cables – a 3.9' - 9.8' coiled cable and 3.9' straight cable – that lock in place to ensure a secure connection during active DJ use. The headphones are lightweight, but built to hold up under rough use. And the soft durable earpads and headband are designed to provide hours of listening comfort.

Features:

• Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones with 45mm Drivers
• Type: Closed-back Dynamic
• Magnet: Neodymium
• 45mm Large-aperture drivers reproduce ultra-expressive, detailed sound
  
• On-ear design with sleek, minimalist style
  
• Detachable locking cables – 3.9' - 9.8' coiled and 3.9' straight – ensure secure connection during active DJ use
• Maximum input power of 2,000 mW enables distortion-free wide-range audio reproduction even at loud volumes
  
• Premium, soft, durable earpads can be worn comfortably for hours
  
• Easily replaceable headband cushion
• Lightweight, sturdy construction
• Frequency Response: 5 Hz - 40 kHz
• Maximum Input Power: 2,000 mW at 1 kHz
• Sensitivity: 100 dB
• Impedance: 37 Ohms
• Connector: 1/8" stereo mini-plug
• Accessory Included: 1/4" screw-on adapter
• Weight: 0.49 Lb. without cable and connector

Authorized Rockville Dealer!

Video of RCXFM20E-B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
 
 The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
• XLR Connectors with Internal Strain Relief for Rugged Reliability
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 20 Ft
• Color: Black

Authorized Rockville Dealer!

Video of RCSS1610:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCSS16-10 16 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
• 100% Copper Conductors for Lower Resistance
• Black PVC Jacket for Both Durability and Flexibility
• Intended for High-Current Applications Only, Not Line-Level Signals
• Length: 20 Ft
• Gauge: 16

Row content