Crown Pro XTI4002 XTI 4002 3200w DSP Amplifier+Audio Technica Headphones+3) Mics

• (1) Crown Pro XTI4002 XTI 4002 3200w Professional Power Amplifier Amp, Advanced DSP
• (1) Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones w/ 45mm Drivers
• (1) Samson R21 3-Pack Dynamic Vocal Cardioid Handheld Microphones+Mic Clips+Case

Authorized Crown Audio Dealer!

Features of XTI4002:

• XTI4002 2 Channe Power Amplifier
• RMS Power @ 2 Ohm: 1600 Watt x 2
• RMS Power @ 4 Ohm: 1200 Watt x 2
• RMS Power @ 8 Ohm: 650 Watt x 2
• Bridge RMS Power @ 8 Ohm: 2400 Watt x 1
• Bridge RMS Power @ 4 Ohm: 3200 Watt x 1
• Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable

Input EQ
6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters
Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ
8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Delay
For signal alignment of driver; 50 mS of total delay.

SubHarmonic Synth
Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

Peakx™ Plus Limiter
User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Presets
50 total presets, 49 of which are user-definable.

• Performance
• Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
• Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB
• Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted)
• Total Harmonic Distortion (THD): < 0.5%
• Damping Factor 20 Hz to 1 kHz: > 500
• Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db
• Input Impedance (nominal)
• Balanced: 20k ohms
• Unbalanced: 10k ohms
• Maximum Input Signal: +22 dBu typical
• AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
• AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle
• Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
• Controls
• Level: Two front-panel rotary level controls, one for each channel
• Power Switch: On/Off switch applies AC power to the amplifier
• Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
• LCD Screen: Backlit liquid crystal display that shows preset and processing status
• Indicators
• Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs)
• –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip
• –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip
• Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio
• Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
• Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
• Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
• Input/Output
• Input Connectors: XLR, one per channel
• Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel
• Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors)
• HiQnet™ USB Connector: Type B, connects to HiQnet™ network
• Constructions
• Chassis: Steel
• Front Panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow
• Dimensions (WxHxD): 19" x 3.5" x 12.25"
• Net Weight: 18.5 lbs (8.4 kg)
• Shipping Weight: 21.5 lbs (9.8kg)

for the Owner's Manual

Authorized Audio Technica Dealer!

Description:

The ATH-PRO7X professional DJ headphones combine the comfort and low-profile style of an on-ear design with powerful 45mm drivers capable of handling 2,000 mW of input power. This combination gives DJs extremely accurate high-fidelity audio reproduction – even at loud volumes – from a pair of headphones that are easy to wear through even the longest gigs.

The ATH-PRO7X headphones come with two interchangeable cables – a 3.9' - 9.8' coiled cable and 3.9' straight cable – that lock in place to ensure a secure connection during active DJ use. The headphones are lightweight, but built to hold up under rough use. And the soft durable earpads and headband are designed to provide hours of listening comfort.

Features:

• Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones with 45mm Drivers
• Type: Closed-back Dynamic
• Magnet: Neodymium
• 45mm Large-aperture drivers reproduce ultra-expressive, detailed sound
  
• On-ear design with sleek, minimalist style
  
• Detachable locking cables – 3.9' - 9.8' coiled and 3.9' straight – ensure secure connection during active DJ use
• Maximum input power of 2,000 mW enables distortion-free wide-range audio reproduction even at loud volumes
  
• Premium, soft, durable earpads can be worn comfortably for hours
  
• Easily replaceable headband cushion
• Lightweight, sturdy construction
• Frequency Response: 5 Hz - 40 kHz
• Maximum Input Power: 2,000 mW at 1 kHz
• Sensitivity: 100 dB
• Impedance: 37 Ohms
• Connector: 1/8" stereo mini-plug
• Accessory Included: 1/4" screw-on adapter
• Weight: 0.49 Lb. without cable and connector

Authorized Samson Dealer!

The R21 Dynamic Vocal/Presentation Microphone 3-Pack features three R21 mics, each with a tight cardioid pickup pattern for maximum gain before feedback, a dual stage windscreen, heavy gauge mesh and anti-dent ring for enhanced protection, as well as gold-plated XLR pins that ensure positive connectivity.

Features:

• Samson R21 3-Pack Dynamic Vocal Cardioid Handheld Microphones+Mic Clips+Case 
• High output dynamic element
  
• Unidirectional cardioid polar pattern for maximum gain before feedback
  
• Withstands high SPLs
  
• Dual stage windscreen
  
• Excellent for live performance and recording
  
• Rugged road-proof design
  
• Gold-plated XLR connector
  
•  Mic clip and carry case Included
  

• Best prices - We sell all Samson Products at great prices
  
• Full Factory Warranty
  
• Lifetime Customer Service by Samson product experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Row content