Crown Pro XLi800 600w 2 Channel DJ/PA Power Amplifier+Audio Technica Headphones

• (1) Crown Pro XLi800 600w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 800
• (1) Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones w/ 45mm Drivers

Authorized Crown Audio Dealer!

Description of XLI800:

Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

Features:

• Crown Pro XLi800 600 Watt 2-Channel DJ/PA Power Amplifier
• RMS Power @ 4 Ohms: 300 Watts x 2 Channels
• RMS Power @ 8 Ohms: 200 Watts x 2 Channels
• RMS Power @ 8 Ohms Bridged: 600 Watts x 1
• Frequency Response: 20 Hz - 20 kHz
• THD: <0.5%
• Distortion: <0.35%
• Slew Rate: >10V/us
• Voltage Gain: 29 dB
• Damping Factor: 8 Ohms, 10 Hz to 400 Hz
• Signal to Noise Ratio (A-Weighted): >100 dB
• Crosstalk: -75 dB, -59 dB
• Input Sensitivity: 0.775V or 1.4V
• Input Impedance: 20k Ohms, 10k Ohms
• AC Line Voltage and Frequency Configurations: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
• IEC Power Connector: 15A
• Stereo/parallel/bridge-mono mode
• User selectable input sensitivity - 0.775V and 1.4V
• Efficient forced-air cooling prevents excessive thermal buildup
• Electronically balanced RCA & XLR inputs; binding post and Speakon  outputs
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
• Protection against shorts, no-load, on/off thumps and radio-frequency interference
• Product Dimensions: 19" x 3.5" 12.4" inches
• Product Weight: 25.1 Lbs.

Authorized Audio Technica Dealer!

Description of ATH-PRO7X:

The ATH-PRO7X professional DJ headphones combine the comfort and low-profile style of an on-ear design with powerful 45mm drivers capable of handling 2,000 mW of input power. This combination gives DJs extremely accurate high-fidelity audio reproduction – even at loud volumes – from a pair of headphones that are easy to wear through even the longest gigs.

The ATH-PRO7X headphones come with two interchangeable cables – a 3.9' - 9.8' coiled cable and 3.9' straight cable – that lock in place to ensure a secure connection during active DJ use. The headphones are lightweight, but built to hold up under rough use. And the soft durable earpads and headband are designed to provide hours of listening comfort.

Features:

• Audio Technica ATH-PRO7X Professional On-Ear DJ Headphones with 45mm Drivers
• Type: Closed-back Dynamic
• Magnet: Neodymium
• 45mm Large-aperture drivers reproduce ultra-expressive, detailed sound
  
• On-ear design with sleek, minimalist style
  
• Detachable locking cables – 3.9' - 9.8' coiled and 3.9' straight – ensure secure connection during active DJ use
• Maximum input power of 2,000 mW enables distortion-free wide-range audio reproduction even at loud volumes
  
• Premium, soft, durable earpads can be worn comfortably for hours
  
• Easily replaceable headband cushion
• Lightweight, sturdy construction
• Frequency Response: 5 Hz - 40 kHz
• Maximum Input Power: 2,000 mW at 1 kHz
• Sensitivity: 100 dB
• Impedance: 37 Ohms
• Connector: 1/8" stereo mini-plug
• Accessory Included: 1/4" screw-on adapter
• Weight: 0.49 Lb. without cable and connector

Row content