Crown Pro XLi1500 900w 2-Channel DJ/PA Power Amplifier+(2) 12” Speakers+Cables

$888.95 $675.70 Save 24%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Crown Pro XLi1500 900w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 1500
  • (2) Rockville SPGN128 12" Passive 1200W DJ PA Speaker ABS Lightweight Cabinet 8 Ohm
  • (1) Pair Rockville Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2
  • (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper

Authorized Crown Audio Dealer!

Description of XLI1500:

Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

Features:

  • Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier
  • RMS Power @ 4 Ohms: 450 Watts x 2 Channels
  • RMS Power @ 8 Ohms: 330 Watts x 2 Channels
  • RMS Power @ 8 Ohms Bridged: 900 Watts x 1
  • Frequency Response: 20 Hz - 20 kHz
  • THD: <0.5%
  • Distortion: <0.35%
  • Slew Rate: >10V/us
  • Voltage Gain: 31 dB
  • Damping Factor: 8 Ohms, 10 Hz to 400 Hz
  • Signal to Noise Ratio (A-Weighted): >100 dB
  • Crosstalk: -75 dB, -59 dB
  • Input Sensitivity: 0.775V or 1.4V
  • Input Impedance: 20k Ohms, 10k Ohms
  • AC Voltage: 110-120V~60 Hz
  • IEC Power Connector: 15A
  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0.775V and 1.4V
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Protection against shorts, no-load, on/off thumps and radio-frequency interference
  • Product Dimensions: 19" x 3.5" 12.4" inches
  • Product Weight: 28 Lbs.

 



How to Set Up your SPG Passive Speaker (Series):

 

Description of SPGN128:

Colossal Pro Audio Power in a Lightweight Enclosure!
Rockville SPGN128 (8-ohm)

Need mammoth, accurate output from your pro audio loudspeaker? Are you looking for a speaker that's going to last? A cabinet that's durable and designed to take the abuse of every day use? Well than we have what you are looking for! The Rockville SoundGig SPG series PA speaker is a passive loudspeaker with lots of style and can handle lots of power.

Rockville SPG SoundGig Passive Loudspeakers at a Glance:

  • Lightweight speakers with heavy-duty components
  • Precision-designed crossovers for maximum clarity
  • Rugged construction with multiple mounting options

Passive design with RPG components
The Rockville SPG SoundGig series passive loudspeakers are a quick way to expand your system, allowing you to add speakers and more power as needed. The SPG speakers offer the same drivers and studio sound quality of the popular Rockville RPG units. They're designed for optimum performance for use with powered mixers and power amplifiers.

Lightweight speakers with heavy-duty components.
The SPGN12 two-way loudspeakers weigh less than 25 pounds and pack a ton of punch. The SPGN12 features 1200-watt peak power capacity. They are designed with a 1.35-inch pure titanium high-frequency compression driver, and a 12“ low frequency transducer with a 2.5” high temperature aluminum voice coil to handle extreme power.

Precision-designed drivers, crossovers and cabinet for maximum clarity.
The crossover in the SPGN12 utilizes a Rockville's unique constant impedance circuit design. With equalization based on unique driver parameters and cabinet design properties the SPG speakers sound dispersion patterns match both the compression horn and woofers. This provides crystal clear natural sound at all volume levels including peak sound levels. You will experience exacting reproduction of bass, critical midrange and high frequencies for superb clarity.

Rugged construction with multiple mounting options
The SPG speakers feature an injection-molded ABS composite chassis that's extremely rigid to prevent unwanted resonance and standing waves forming inside the cabinet. The hard shell cabinet absorbs impacts that would turn lesser wood boxes into sawdust. For added convenience, SPG series speakers feature a pole mount socket in the bottom for stand mounting and the asymmetrical trapezoidal cabinet allows the speaker to be used on its side for stage monitor use.

Features:

  • Rockville SPGN128 12“ Passive 1200 Watt 8 Ohm Lightweight DJ PA ABS Cabinet Speaker
  • Power Handling: 300 Watts RMS / 600 Watts Program Power / 1200 Watts Peak
  • High power long-throw 12'' woofer with 2.5“ aluminum voice coil provides incredibly deep bass and acoustic power
  • High-power 2-way pro sound reinforcement speaker system for live sound and play back applications
  • Compact and light weight system delivers distortion free sound even at extreme SPL
  • State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction
  • Twist-Lock speakon input and output connections
  • Stage floor or stand mounting with 35-mm pole socket
  • Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into the cabinet
  • Versatile trapezoidal enclosure design allows different positioning
  • Tilts on its side for use as a floor monitor
  • Ergonomically shaped handle for easy carrying and setup
  • High-quality components and exceptionally rugged high impact ABS construction
  • Impedance: 8 Ohms
  • Frequency Response: 40Hz-20KHz
  • Maximum SPL @1w/1m: 125dB peak / 122dB continuous

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.

All About Your RVSS2:


How to Set Up Your PA Speaker Stands:


Description:

This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment.

Includes:

  • (2) Tripod Speaker Stands

Features:

  • Adjustable Height
  • Steel Construction
  • Black Color
  • Weight Capacity: 132 lbs
  • Adjustable Height Range: 47-79 inches
  • Base spread: 0-23 inches
  • Tube Diameter: 1.38 inches
  • Leg Diameter: 1.38 inches


The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.

Authorized Rockville Dealer

Video of RCSS1425:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

  • Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
  • 100% Copper Conductors for Lower Resistance
  • Black PVC Jacket for Both Durability and Flexibility
  • Intended for High-Current Applications Only, Not Line-Level Signals
  • Length: 25 Ft
  • Gauge: 14
Shipping & Returns

Row content