JBL Subwoofer+4) Satellite+4) 8" Wall Speakers+350w Amp For Restaurant/Bar/Cafe

$1,869.50 $1,738.69 Save 7%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Rockville RCS350-6 350 Watt 6 Zone 70v Commercial/Restaurant Amplifier/Bluetooth
  • (1) JBL C50PACK Commercial Subwoofer+(4) Satellite Speakers For Restaurant/Bar/Cafe
  • (2) Pair of JBL Control 28-1 8" 60w 70v Commercial Indoor/Outdoor Speakers For Restaurant

How to Set up Your RCS Series of Amplifiers:


Video of RCS350-6:

Includes:
  • Amplifier
  • Remote
  • Rack mount ears
  • Power Cable
  • FM Radio antenna
  •  Description:

    Rockville is proud to introduce our new RCS series of products. The RCS350-6 is a 350 Watt 6-zone rack mountable digital hybrid amplifier/receiver. This amplifier is capable of 70 volt, 100 volt, 8-ohm, and 4-ohm applications. This makes it perfect for use in a Restaurant/Bar/Café/Lounge/School/Conference room or any other setting where many speakers are needed.

    This model offers 350 watts at 70 volt or 100 volt and the power can be split up into 6 zones. (Most professionals recommend you not exceed 80% of the amp power, so we recommend your speakers watt not to be more than 300 in total on the taps). Each zone can have the power split as your please. For example you can put all 300 watts into one zone with one volume control. Or you can have zone 1 with 100 watts, zone 2 with 100 watts and the rest of the zones with 25 watts each. Just add the total watts up to be under 350 and you are OK. No complex wiring required like with 8 ohm systems.

    With 3 mic inputs; each with echo control, you can use this amplifier for announcements, speeches or even Karaoke night! This model also includes a chime button so you can create a chime sound before making announcements. The RCS series features Bluetooth audio streaming so you can play your favorite music or access a playlist right from your phone! This amp also features both USB and SD inputs allowing you to play audio stored on a USB thumb drive or SD Card. There are also 2-line inputs that allow you to plug in another audio device such as an MP3 player, CD player, TV, etc. This is our new and improved version that now has optical input so you can connect this to a digital source like a television or projector.

    Individual volume knobs for each of the 6 zones and volume knobs for each of the 3 mic inputs gives you full control over your system.

    The built-in clipping limiter function protects your speakers and the amp from overheating. For further protection there is also a cooling system in this amplifier that will keep the components running cool making the amplifier durable and reliable.

    This is our new and improved version with euro-block speaker terminals that make it super easy to install the wires even if the receiver is hidden in a corner. The terminals are detachable and once you connect your speaker wire to the terminal it just clicks into the receiver.

    Our goal with the RCS series was to make it possible for anyone to install 70 volt systems on their own without spending thousands of dollars on a contractor. This model makes it a breeze to connect many speakers and multiple external sources. We intentionally use common plugs like RCA and 1/4" on our model to make this more universal and user friendly. With our unique design you can feel confident in your DIY ability when installing our commercial system!

    What is 70 volt ?

    70 volt systems are the number one choice for any application where you want to install multiple speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, with this 350 watt / 70 volt amplifier, you can install speakers that total close to 300 watts. It does not matter if it is 20 speakers that are 15 watts each or 40 speakers that are tapped at 7.5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors that many speakers in 70 volt have on them. For example, some speakers might have selectable options of 1.5w, 3w, 5w, 10w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. What this allows for is full customization of your sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 10 watts, the ones in the hallway at 3 watts and the speakers in the bathrooms at 1.5 watts. Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.
    70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads.
    The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.
    If you want an easy to use feature-rich 70 volt amplifier with a ton of power and 6 zones the Rockville RCS350-6 is your best choice!

    Applications:

    • Restaurant
    • Bar
    • Café
    • School
    • Lounge
    • Home (Multi-zone, Multi-room)
    • Office
    • Warehouse

    Features:

    • Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver
    • Capable of 70 volt, 100 volt, 8 ohm, and 4 ohm
    • 70/100 volt RMS Power: 355 Watts
    • 6-Zones – each zone has a separate volume control
    • Built in Bluetooth audio streaming
    • FM radio tuner
    • USB input to play audio stored on a thumb drive (32gb max)
    • SD card slot to play music stored on an SD Card (32gb max)
    • Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3
    • Echo control for the mic inputs with speed and repeat adjustments
    • Built in clipping limiter to protect the amp and speakers
    • BASS and Treble control
    • Detachable euro-block speaker output terminals for easy installation
    • Chime button for making announcements
    • Top quality aluminum panel with industrial grade knobs
    • 5 segments signal level indication
    • Built in cooling system keeps component cool at all times

    Inputs and Outputs:

    • (2) Sets RCA AUX inputs
    • (3) Mic inputs
    • RCA Line output
    • Optical input
    • Detachable euro-block speaker output terminals for easy installation
    • 100V speaker red positive speaker output terminal
    • 70V speaker red positive speaker output terminal
    • 8 Ohm red positive speaker output terminal
    • Shared negative speaker output terminal

    Specifications:

    • Power Requirements: 120V / 50-60Hz
    • A Weighted Signal to Noise (@ 1W) -68.1dBA
    • A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA
    • Frequency response: 49Hz to 14.9 Khz
    • Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%
    • Weight: 22.7lbs
    • Dimensions: 19” x 16” x 4” inches

    Description of C50PACK:

    Packaged Surface-Mount Subwoofer-Satellite Loudspeaker System
    The Control 50 Series subwoofer-satellite loudspeaker system provides high ?delity sound in restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, or any location where full-range high ?delity foreground/background music is required from surfacemount system.

    Features:

    • JBL C50PACK Commercial Subwoofer+(4) Satellite Speakers For Restaurant/Bar/Cafe
    • Versatile four satellite speaker system
    • Stylish, unobtrusive design ?ts into a wide variety of decor
    • High ?delity sound
    • Selectable 70V/100V for distributed lines, or low impedance
    • Wall-mount brackets include
    • Available in black or white

    Specifications:

    • Frequency Range (-10 dB) 32 Hz – 20 kHz
    • Frequency Response (±3 dB) 50 Hz – 17 kHz
    • Power Capacity 200 Watts Continuous Program Power (100 hrs)
    • 100 Watts Continuous Pink Noise (100 hrs)
    • Nominal Sensitivity
    • (2.83V, 1m) 87 dB (subwoofer center of wall, higher sensitivity depending on subwoofer boundary loading, see application note)
    • Nominal Impedance 4 ohms (in bypass/thru mode) with 4 satellites
    • Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 ohms on switch to indicate subwoofer impedance

    Description of Control 28-1:

    High Output Indoor/Outdoor Background/Foreground Speaker
    The Control 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

    Features:

    • Components:
    • 8” woofer with woven fiberglass cone
    • 1” PEI diaphragm tweeter with fluid cooling
    • Contemporary, high-design appearance
    • Built-in InvisiBall® mounting hardware*, plus available U-bracket
    • Weather resistant enclosure and transducers
    • Wide 100° x 100° coverage
    • 120 Watt power handling (240 Watt program) in direct 8O setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
    • High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.

    Specifications:

    • Frequency Range: (-10 dB) 45 Hz to 20 kHz
    • Frequency Response: (+/-3 dB) 62Hz - 16 kHz
    • Power Rating:
    • 240 W Continuous Program (2 hrs)
    • 120 W (480W peak), Continuous Pink Noise (2 hrs)
    • 90 W (360W peak) Continuous Pink Noise (100 hrs)
    • Maximum Input Voltage: 27.5 V RMS (2 hrs), 55.0 V peak
    • Maximum SPL: 112 dB ave. Continuous Pink Noise (118 dB peak)
    • Sensitivity: 91 dB, 1W/1m (ave. 100 Hz – 10 kHz)
    • Coverage Angle: 100° x 100°
    • Directivity Factor (Q): 7.3 (averaged 1kHz – 16kHz)
    • Directivity Index (DI): 8.3dB (averaged 1kHz – 16kHz)
    • Nominal Impedance: 8 ohms (THRU setting)
    • Crossover Type: 2nd order low-pass, 1st order high-pass, plus conjugate shaping
    • Transformer Taps
    • 70V: 60W, 30W, 15W, 7.5W
    • 100V: 60W, 30W, 15W
    • Insertion Loss: <0.94 dB at any tap setting
    • Thru Setting: 8O nominal
    • Recommended Protective: High-Pass 45 Hz high-pass (24 dB/oct) for 8O operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
    • Low Frequency Driver: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
    • High Frequency Driver: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
    • Enclosure Material: High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
    • Grille: Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
    • Installation: InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
    • Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
    • Termination: Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
    • Agency Rating: ROHS-compliant; Transformer UL Recognized per UL1876
    • Colors: Black (RAL9004) or white (-WH, RAL9016)
    • Dimensions (H x W x D): 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket.
    • Net Weight: 6.8 kg (15.0 lbs)
    • Shipping Weight: 15.4 kg (34 lbs) pair-packed (for 2 speakers)
    • Included Accessories: InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key
    • Optional Accessories:
    • MTC-28UB-1 – Yolk-type U-bracket (&-WH)
    • MTC-28WMG-1 – Weather Max grille with backing (&-WH)
    • MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH)
Shipping & Returns

Row content