Marts Digital MXS 1200x4 2 OHMS 1200w RMS 4 Channel Class "D" Car Amplifier Amp
Product Description
Description:
Marts Digital offers high-quality products for high-quality sound from Brazil to the world! These amplifiers will help you secure your seat on the journey into the universe of high performance.
Features:
- Designed in Brazil
- RMS Power at 2 Ohm 12.6v: 1160W RMS / RMS Power at 2 Ohm 14.4v: 1120W RMS
- RMS Power at 4 Ohm 12.6v: 1100W RMS / RMS Power at 4 Ohm 14.4v: 1120W RMS
- BTL RMS Power at 4 Ohm 12.6v: 975W RMS / BTL RMS Power at 4 Ohm 14.4v: 1010W RMS
- Connect the 12V power supply lead only after all the other leads have been connected.
- Be sure to connect the ground lead securely to a metal point of the car. A loose connection may cause a malfunction of the amplifier.
- Be sure to connect the remote control lead of the heat unit to the amplifiers remote terminal. A loose connection may cause a malfunction of the amplifier.
- When using a car radio without a remote output for the amplifier, connect the remote terminal to the accessory power supply.
- Use the power supply lead with a fuse attached. Place the fuse in the power supply lead as close as possible to the car battery.
- You MUST use 100% Oxygen Free Copper wire at its maximum size. Copper Clad Aluminum (CCA) Wire will cause a failure.
Specifications:
- RMS Power at 2 Ohm 12.6v: 290W x 4 RMS
- RMS Power at 4 Ohm 12.6v: 275W x 4 RMS
- BTL RMS Power at 4 Ohm 12.6v: 487W x 2 RMS
- RMS Power at 2 Ohm 14.4v: 280W x 4 RMS
- RMS Power at 4 Ohm 14.4v: 280W x 4 RMS
- BTL RMS Power at 4 Ohm 14.4v: 505W x 2 RMS
- Supply voltage: 9.5 - 16 Volts
- Frequency Response: 10Hz - 20KHz
- LP Pass Crossover: 50Hz - 2KHz
- HP Pass Crossover: 15Hz - 2KHz
- Bass Boost: 0 to 12 dB
- Signal to Noise Ratio: 95 dB
- Harmonic Distortion: 1% THD
- Input Sensitivity: 0.2v
- High level input: 6v
- Product Dimensions:(L×W×H) 7.50"×9.00"×2.5"
Shipping & Returns
Row content